CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   FLUENT (http://www.cfd-online.com/Forums/fluent/)
-   -   CAD & GAMBIT (http://www.cfd-online.com/Forums/fluent/49290-cad-gambit.html)

Kostas Pan September 18, 2008 07:19

CAD & GAMBIT
 
How i can design my geometry in Autocad and after i pass it the Gambit? It is needed to save the model which i make in Autocad, at concrete type of file?

wabik September 18, 2008 07:51

Re: CAD & GAMBIT
 
Yes, in *.sat file

Brgds

D_Lichu September 18, 2008 09:01

Re: CAD & GAMBIT
 
.igs should work too (in Autocad Mechanical 2007 works)

Madusuthanan September 20, 2008 06:59

Re: CAD & GAMBIT
 
if you are geomentry in autocad is 3D then no problem you have to export your model in .Sat format from autocad and inport it to gambit. If you want to export 2d domains then you required help of third party tools like turbocad for exporting 2d domains to gambit as .sat file

doki September 20, 2008 08:22

Re: CAD & GAMBIT
 
there are so many extentions which gambit is capable of handling. the .sat file is used for solid entities only! so for several solids there is recommended to use some other extention. IGS and other files can be used too! but it depends to the case.

Quoc September 23, 2008 11:31

Re: CAD & GAMBIT *NM*
 

Mojtaba October 8, 2008 05:04

Re: CAD & GAMBIT
 
hi I want to calculate "moment of inertia" in gambit. but it seems that gambit can not do this. can I export geometry from gambit to autocad? thank a lot


All times are GMT -4. The time now is 02:26.