CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

using Tgrid meshing from gambit with FIdap

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   September 30, 2008, 03:50
Default using Tgrid meshing from gambit with FIdap
  #1
philippe
Guest
 
Posts: n/a
Hi, i'd like to mesh a manifold and it's very complicated with fidap so i chose to use gambit. The only mesh that i can apply is Tgrid then i export the mesh to fidap. And i try to solve my probleme but the solution doesn't converge even for a simple cylinder...

What can i do please...

Thank you
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
pb of meshing in fidap philippe FLUENT 0 July 8, 2008 09:42
meshing a wing with tgrid sandeep varma FLUENT 2 April 16, 2007 03:38
TGrid & Gambit!!! Ahmed FLUENT 2 June 29, 2003 19:22
Tgrid meshing around cylinders in GAMBIT Chris FLUENT 3 March 5, 2003 07:43
TGRID & Meshing Eric FLUENT 3 February 13, 2002 10:52


All times are GMT -4. The time now is 10:10.