CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

Export command lines

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   October 15, 2008, 07:48
Default Export command lines
  #1
isabel
Guest
 
Posts: n/a
Hi everybody,

Sometimes, I use Fluent for many cases, where I need to change some parameters only. So, I donīt know that, in Fluent there is a way to export the code in *.txt command lines to control it without GUI.

I know that in CFX you can create a ccl file and open it with a text program to edit it.

Thanks in advance
  Reply With Quote

Old   October 16, 2008, 03:58
Default Re: Export command lines
  #2
max
Guest
 
Posts: n/a
Hello Isabel, this can be done by using a journal (.jou) file which contains the text-commands for setting the desired parameters. Generated once (file/write/Start Journal) you can easily edit this text file to set the appropriate values and read it back into a fluent session.

cheers Max
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Fluent Export Command Issue .... Leo Hindarto FLUENT 0 January 4, 2009 00:20
Where do the first several lines come from lakeat OpenFOAM Installation 0 June 27, 2007 11:35
gambit edge mesh ratio export command? sophie FLUENT 0 May 14, 2007 02:51
Command lines in Fluent. pa-Hung FLUENT 10 July 12, 2005 17:20
Text command of monitor-command? Mika FLUENT 0 March 27, 2001 14:46


All times are GMT -4. The time now is 20:53.