|
[Sponsors] |
October 15, 2008, 00:45 |
how to do solidification analysis in fluent
|
#1 |
Guest
Posts: n/a
|
hi i have to analyse the soldification behaviour of a phase change material encapsulted in a cylinder wat r the BC to be given and how to model it.
the tutorial is avilable only for casting with flow. in my case no flow will occur. the material will be sealed inside a cylinder. pls tell me how to do it. |
|
October 15, 2008, 07:28 |
Re: how to do solidification analysis in fluent
|
#2 |
Guest
Posts: n/a
|
if there is no flow, only heat transfer and solidification, no boundary is needed to specify, i think
|
|
October 16, 2008, 01:04 |
Re: how to do solidification analysis in fluent
|
#3 |
Guest
Posts: n/a
|
thanks for ur reply
since it is a cylinder, i modeled half of it. but how to specify the interior material in gambit. what boundary type i should use.i gave wall for the cylinder and axis for the mid plane. in fluent i cant change the default interior into any material. pls help |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
help fluent: solidification/melting | N_USMA | FLUENT | 4 | March 11, 2010 01:49 |
Tracking the solidification front in Fluent? | Kjell Magnusson | FLUENT | 0 | May 10, 2006 09:31 |
Analysis of 2D airfoils in Fluent | Himanshu | Main CFD Forum | 1 | January 11, 2006 16:07 |
about the solidification/melting model in Fluent | majestywzh | FLUENT | 0 | April 10, 2003 09:37 |
How to use solidification and melting in fluent | phani | FLUENT | 0 | February 18, 2003 07:40 |