CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

Help.

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   October 18, 2008, 06:56
Default Help.
  #1
s wang
Guest
 
Posts: n/a
Dear all, I am simulating a Vertical axis wind turbine.Currently, just a 2D model using sliding mesh in Fluent software. However, this message always pops out everytime I start the simulating:

absolute pressure limited to 1.000000e+000 in 3 cells on zone 3 turbulent viscosity limited to viscosity ratio of 1.000000e+005 in 471 cells

I use a far-field pressure boundary condition.

Could you please tell me how to solve this problem?

Best regards, Wang
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -4. The time now is 22:24.