CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

Help PLZ.....

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   October 23, 2008, 20:59
Default Help PLZ.....
  #1
mike
Guest
 
Posts: n/a
can any one tell me what is the setting for the SOLVER and VISCOUS. am trying to simulate the flow past a circuler cylinder 2D.

thanks
  Reply With Quote

Old   October 23, 2008, 21:10
Default Re: Help PLZ.....
  #2
CDE
Guest
 
Posts: n/a
The setting used for CFD simulations are very dependant on the type of flow and physical phenomena you are trying to model. Since you are simulating flow past a cylinder, I will assume you are interested in vortex shedding behind the cylinder. This flow changes significantly over time so you will need to use Unsteady in the SOLVER settings.

The choice of VISCOUS settings depends on the accuracy that you require. You can obtain a solution using the standard k-e model or any of the other turbulence models that have greater complexity.
  Reply With Quote

Old   October 24, 2008, 21:35
Default Re: Help PLZ.....
  #3
mike
Guest
 
Posts: n/a
thanks...
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -4. The time now is 17:56.