CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   FLUENT (http://www.cfd-online.com/Forums/fluent/)
-   -   thin extrusion meshing (http://www.cfd-online.com/Forums/fluent/49630-thin-extrusion-meshing.html)

guillaume October 27, 2008 20:38

thin extrusion meshing
 
Hi I'd like to know your opinion on what is currently the best tool for meshing thin extrusions: I am modelling a double glazed window and its frame in 3D. The extrusion profile of the frame is fairly complex; it's made up of 2 mm thick aluminium. I'd like to mesh this profile anisotropicaly so that I don't end up with 10 billion cells. It becomes tricky with the fact that there are quite a few different materials in a window, and there are about 100 different interfaces between the different glass/frame materials and the air. The set up of all these interfaces is quite painful. Is there a tool around that could simplify the meshing process of this kind of geometry by offering reasonably anisotropic meshing techniques and automatic interface recognition? Thanks



All times are GMT -4. The time now is 13:19.