CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

T-junction meshing in Gambit

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   October 28, 2008, 06:29
Default T-junction meshing in Gambit
  #1
David Friis Aarup
Guest
 
Posts: n/a
Hey.

I am trying to mesh a T-junction (as the letter T), an intersection between two cylinders in Gambit. I have divided the volume of the cylinders into parts as a butterfly-volume and meshed them with a hexagonal mesh. My question to you is: how should I mesh the intersection region? I would like to have a lot of cells in there with a structured mesh to obtain a better simulation and would like to hear how to divide the region.

Thanks
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Gambit: decomposing T-junction geometry John FLUENT 9 August 1, 2012 15:27
T-junction hexahedral gambit meshing (same radius) Florence FLUENT 6 January 5, 2010 07:27
T junction - meshing wall zone in Gambit John FLUENT 3 August 29, 2005 10:09
t-junction hexahedral gambit meshing solomon FLUENT 1 April 30, 2003 13:32
Meshing in Gambit... Kalai FLUENT 1 August 14, 2002 04:55


All times are GMT -4. The time now is 12:36.