CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

doubt on continuum

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   November 4, 2008, 23:31
Default doubt on continuum
  #1
raghav
Guest
 
Posts: n/a
Hi, I'm modelling an axi-symmetric problem. I divided my entire domain into 6 faces and meshed it. I then selected FLUID type for all six faces. While reading the case in FLUENT, it is not showing individual FLUID type that I have created in GAMBIT. Should we define any boundary condition to the line that forms the interface between the FLUID zones? Can anyone let me know their suggestions Thankyou
  Reply With Quote

Old   November 5, 2008, 15:19
Default Re: doubt on continuum
  #2
Amod
Guest
 
Posts: n/a
Dear Raghav,

By axi-symmetric problem, do you mean rotating periodic flow? In that case, you will you will have to use periodic B.C.

In in case, you cannot select fluid type for faces if the solution domain is 3D. You will have to select the wall or symmetric B.C. for faces as the case may be.

Hope this helps! Amod
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
doubt on defining continuum type raghav FLUENT 0 October 23, 2008 23:39
doubt on specifying continuum types raghav FLUENT 2 October 21, 2008 23:46
continuum or rarefied? Dave Main CFD Forum 5 March 9, 2007 15:16
Continuum-type David FLUENT 1 July 20, 2004 16:18
regarding solid continuum... Deadly FLUENT 1 August 28, 2002 18:09


All times are GMT -4. The time now is 19:35.