CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

Disappear zone in Fluent

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   November 13, 2008, 04:01
Default Disappear zone in Fluent
  #1
Vu, Ha-Hai
Guest
 
Posts: n/a
Hi everyone,

I'm trying to import a mesh file from Gambit into Fluent but a warning line displayed as:

'Number of nodes read (14628) does not match number referenced (12612). Resetting counter to match the number referenced'

After that, one of my meshed face disappears with a status from Fluent as following:

'Skipping zone im-inter (not referenced by grid)'

'im-inter' is the name of my meshed face.

What wrong of my meshed model? Please tell me how to solve this problem.

Thanks a lot.

Vu, Ha-Hai
  Reply With Quote

Old   November 17, 2008, 06:18
Default Re: Disappear zone in Fluent
  #2
uday
Guest
 
Posts: n/a
Hi Vu

The Face zone might be a stand alone face zone which is not connected to cell zone (Volume Mesh). Try to check it in gambit with a cross section view of mesh........

i hope this might be the only reason.
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Creating new zone in Fluent John FLUENT 4 May 16, 2013 17:05
Creating a new zone in Fluent Virginie FLUENT 4 March 30, 2010 01:55
GmshToFoam or gmsh2ToFoam amp gmsh sudden disappear zhoubinwx Open Source Meshers: Gmsh, Netgen, CGNS, ... 20 August 7, 2009 18:07
air bubble is disappear increasing time using vof xujjun CFX 9 June 9, 2009 07:59
disappear particles in GENTRA tomo Phoenics 1 December 13, 2002 23:05


All times are GMT -4. The time now is 02:33.