CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

How to create monitor points on Fluent 6.3.26

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   November 16, 2008, 11:37
Default How to create monitor points on Fluent 6.3.26
  #1
Rogerio Fernandes Brito
Guest
 
Posts: n/a
Hi folk,

How to create monitor points on Fluent 6.3.26 to check the temperature versus time (or step) during a transient simulation.

Thanks for helping!
  Reply With Quote

Old   November 16, 2008, 17:07
Default Re: How to create monitor points on Fluent 6.3.26
  #2
Paolo Lampitella
Guest
 
Posts: n/a
You have to create the point under Surface -> Point... in the GUI. After that, always through the GUI, go in Solve -> Monitors -> Surface...

then use the point just created to monitor what you like.
  Reply With Quote

Old   November 19, 2008, 21:27
Default Re: How to create monitor points on Fluent 6.3.26
  #3
Rogerio Fernandes Brito
Guest
 
Posts: n/a
Thanks!
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Monitor points with OpenFoam vvqf OpenFOAM Pre-Processing 6 December 6, 2011 11:54
Using variables from monitor points with CEL Robert Stevens CFX 1 June 25, 2008 03:04
Delete Monitor points Beth CFX 2 June 6, 2007 19:21
Monitor Points from Batch File Ogbeni CFX 0 March 20, 2006 08:14
monitor points mike abelado CFX 5 October 15, 2004 04:30


All times are GMT -4. The time now is 06:35.