CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   FLUENT (http://www.cfd-online.com/Forums/fluent/)
-   -   Continuum boundary types for particle tracking (http://www.cfd-online.com/Forums/fluent/49828-continuum-boundary-types-particle-tracking.html)

Prashanth November 18, 2008 18:17

Continuum boundary types for particle tracking
 
Hello

I am trying to model a particle deposition problem. The geometry involves a huge external cylinder with a small inlet at the center of its left face. There is a small cylinder inside the external cylinder and the flow from the inlet is towards one face of this cylinder where the deposition happens. When I create the mesh in GAMBIT, what do I specify as the continuum type as my flow has both fluid and solid particles?

Thanks

Prashanth

KJ Larsen November 19, 2008 08:43

Re: Continuum boundary types for particle tracking
 
It should be fine to set the default interior as fluid in Gambit for Euler or DPM multiphase models.

Kris


All times are GMT -4. The time now is 03:01.