CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

3d pipe mesh in gambit

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   November 25, 2008, 22:13
Default 3d pipe mesh in gambit
  #1
christoforos
Guest
 
Posts: n/a
hello everyone..I have a problem in meshing a 3d pipe.i want the mesh to be thick near the walls and i want to control the mesh in the horizontal direction.i tried meshing the bottom of the pipe then adjusting size function on the side faces and at hte end meshing with cooper.cooper couldn't be applied because the faces were not mappable.i read how to make mappable a face but i couldnt make it work.does anyone know how to do it and give me specific directions?this is my last step before i finish.i f anyone wants i can email the geometry and take a close look..thank you in advance
  Reply With Quote

Old   November 26, 2008, 02:02
Default Re: 3d pipe mesh in gambit
  #2
mAx
Guest
 
Posts: n/a
mail me your geometry (the cad file if you have imported one, and the *.jou file)
  Reply With Quote

Old   November 11, 2014, 00:16
Default 3d pipe mesh in gambit
  #3
New Member
 
manish sharma
Join Date: Nov 2014
Location: guna
Posts: 28
Rep Power: 2
m7566 is on a distinguished road
sir i have also same problem please any one help me
m7566 is offline   Reply With Quote

Old   November 11, 2014, 00:17
Default
  #4
New Member
 
manish sharma
Join Date: Nov 2014
Location: guna
Posts: 28
Rep Power: 2
m7566 is on a distinguished road
Quote:
Originally Posted by christoforos
;155005
hello everyone..I have a problem in meshing a 3d pipe.i want the mesh to be thick near the walls and i want to control the mesh in the horizontal direction.i tried meshing the bottom of the pipe then adjusting size function on the side faces and at hte end meshing with cooper.cooper couldn't be applied because the faces were not mappable.i read how to make mappable a face but i couldnt make it work.does anyone know how to do it and give me specific directions?this is my last step before i finish.i f anyone wants i can email the geometry and take a close look..thank you in advance
sir will u please send me ur jau file on my mail id m9713001413@gmail.com
m7566 is offline   Reply With Quote

Old   June 8, 2015, 04:25
Default
  #5
New Member
 
amin
Join Date: Jun 2015
Posts: 12
Rep Power: 2
amin4547 is on a distinguished road
Sir;

I want to mesh a 3d pipe with turbulent flow inside it. I would be grateful if you would help me.

mosallaei.amin@gmail.com
amin4547 is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
GAMBIT : Pipe with multiple holes MML FLUENT 12 December 13, 2013 08:44
3d mesh for a pipe tsjb00 OpenFOAM Native Meshers: blockMesh 2 January 30, 2009 05:40
GAMBIT : spiral pipe brahim FLUENT 0 April 3, 2006 07:30
how to show 2d pipe in gambit or Fluent zalhit FLUENT 2 June 14, 2003 13:57
mesh gen for two pipe tee Dan Wachs CD-adapco 2 June 19, 2000 18:14


All times are GMT -4. The time now is 16:26.