CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

importing Icem mesh into Gambit

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   December 6, 2008, 03:44
Default importing Icem mesh into Gambit
  #1
srinivas
Guest
 
Posts: n/a
Hii....I am facing a problem while importing a hybrid mesh, which is created in ICEMCFD, into gambit. Actually i created a half mesh in ICEMCFD and try to reflecting the other half but it is giving some interface problems..so i am trying to mirroring in Gambit.
  Reply With Quote

Old   December 10, 2008, 04:51
Default Re: importing Icem mesh into Gambit
  #2
Wifi Lee
Guest
 
Posts: n/a
You can set the mirror face internal.
  Reply With Quote

Old   December 11, 2008, 23:01
Default Re: importing Icem mesh into Gambit
  #3
srinivas
Guest
 
Posts: n/a
while importing itself it is giving problem.
  Reply With Quote

Old   December 12, 2008, 04:58
Default Re: importing Icem mesh into Gambit
  #4
Uday
Guest
 
Posts: n/a
Hi srinavas

You can mirror the mesh in icem it self it has the capability. The reason why i am insisting you to do it icem is gambit needs geometrical definations for that mesh so it would be very cumbersome long process. If you have some idea in icem copy that mesh against the mirror plane and even icem will ask you if you want to merge the nodes of that mirror copy and original copy.(tetra mesh)

or

You can export a *.msh file from icem read it in Tgrid and then mirror it which would be more easier then the gambit process.

If its not possible mail me the mesh at udayrg@gmail.com zipped i would do it for you.

Regards Uday
  Reply With Quote

Old   December 12, 2008, 05:06
Default Re: importing Icem mesh into Gambit
  #5
Uday
Guest
 
Posts: n/a
Ok you have the project file for icem rght

Go to edit mesh option and the that select mesh transformation tool

once you go there you would have four options the third one is for mirroring put on copy option and merge nodes option automatic and even delete duplicate node option select the refelction axis or plane according to you geometry and its done.

regards

uday
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Importing a mesh from ICEM Waseem Siddique CD-adapco 14 February 9, 2009 06:05
Importing a hex core mesh from Gambit dmoroian OpenFOAM Other Meshers: ICEM, Star, Ansys, Pointwise, GridPro, Ansa, ... 6 September 18, 2006 02:45
Importing a hex core mesh from Gambit dmoroian OpenFOAM Other Meshers: ICEM, Star, Ansys, Pointwise, GridPro, Ansa, ... 0 September 15, 2006 03:54
Importing Patran mesh into Gambit Trac FLUENT 1 September 29, 2005 10:32
importing mesh from ICEM CFD into CFX 5 Jay CFX 2 November 12, 2002 14:46


All times are GMT -4. The time now is 18:59.