|
[Sponsors] |
December 11, 2008, 05:37 |
Periodic condition for wing.
|
#1 |
Guest
Posts: n/a
|
Hi all!
I am simulating a 3D wing by using "Periodic conditions". The flow is simple with inlet and outlet flow, and Periodic for two ends of the wing. With using "Specify Pressure Gradient = 0" for Periodic Bc at Steady State solution. For the some first iterations, the results on the wing are reasonable. However, after ~1500 interations the results show a spanwise vortex appears near the periodic Bc. So, Anybody can suggest me any idea how to solve this problem? Thanks in advance! |
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Set ONERA M6 Wing Initial Condition | Dianhong | Main CFD Forum | 1 | January 20, 2016 05:19 |
Periodic Boundary Conditions for infinite 3D wing | Scott | FLUENT | 0 | March 14, 2008 12:30 |
About periodic condition | luckyluke | OpenFOAM Running, Solving & CFD | 5 | June 21, 2005 09:41 |
Periodic B.Condition | BELMILOUD | FLUENT | 2 | March 9, 2005 03:54 |
periodic condition? | scarecrow | CFX | 1 | December 3, 2003 00:20 |