|
[Sponsors] |
Y+ adaption for varying boundary layer thickness |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
December 11, 2008, 05:03 |
Y+ adaption for varying boundary layer thickness
|
#1 |
Guest
Posts: n/a
|
Hello everyone
I am modeling a simple 3D geometry with heat transfer and rotation. Both, the heat transfer and the rotation, cause the boundary layer thickness to vary along the axial distance. For this reason I wanted to use y +/* adaption to capture the varying thickness. Does anyone know if this is possible? So far I only managed to obtain a uniform distance of the first cell form the wall which causes my Y+/* values to have a large spread. Thanks for any help! |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
boundary layer thickness | Ralf Schmidt | Main CFD Forum | 5 | April 24, 2010 11:50 |
Boundary layer thickness | Franny | CFX | 2 | March 30, 2007 18:28 |
Re: boundary layer thickness | Bill Wang | Main CFD Forum | 2 | July 7, 2006 22:30 |
Boundary layer thickness. | raintung | FLUENT | 1 | May 22, 2003 11:21 |
boundary layer thickness | 98.4F | Main CFD Forum | 1 | December 29, 2000 07:23 |