CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

set UDS value at interior BC

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   December 12, 2008, 13:14
Default set UDS value at interior BC
  #1
Simon
Guest
 
Posts: n/a
Hi, I'm trying to solve a UDS (2D)in a porous zone confined by walls on 3 corners and an interior interface with a fluid zone on the remaining corner. The UDS needs to be solved only in the porous domain and not in the fluid zone, where it has been deactivated. Only diffusive flux is active and convective flux function is equal to zero. The boundary conditions that need to be set are (being phi the uds):

1.grad(phi) = 0 on the walls; (easily done by GUI) 2.phi = 0 on the interface; source terms are present throughout the whole porous region;

I have tried to find out how FLUENT deals with interiors and what BC does it set for a UDS. Having not found an answer, my guess is that by default it sets grad(phi) = 0, so my question is: how can I set the BC no 2.? I' have tried patching with DEFINE_ADJUST cells next to the interior with C_UDSI(c,t,0)=0 but uds conservation is not respected. Please help! Any tip or suggestion is very welcomed!

many regards, Simon

  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Interior flow Zen FLUENT 0 September 24, 2005 20:10
default interior matty FLUENT 0 August 3, 2005 06:44
help on INTERIOR error zwdi FLUENT 2 February 25, 2004 12:38
INTERIOR Mike FLUENT 1 December 23, 2003 15:05
interior cells vidyasagar FLUENT 3 March 26, 2003 16:33


All times are GMT -4. The time now is 03:52.