CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   FLUENT (http://www.cfd-online.com/Forums/fluent/)
-   -   job on remote desktop (http://www.cfd-online.com/Forums/fluent/50230-job-remote-desktop.html)

jack January 7, 2009 08:44

job on remote desktop
 
Hello, when I try to run job on remote desktop via telnet, I got the following error message. Does anybody know, please?!?

Terminal Server remote client not allowed Feature: fluentall License path: \asus-w2j\fluent.inc\license tx86\..\license.dat FLEXlm error: -103,577 For further information, refer to the FLEXlm End User Manual, available at "www.macrovision.com". No such feature exists Feature: fluent License path: \asus-w2j\fluent.inc\license tx86\..\license.dat FLEXlm error: -5,222 For further information, refer to the FLEXlm End User Manual, available at "www.macrovision.com".


Anastasios Georgoulas January 8, 2009 08:13

Re: job on remote desktop
 
I had the same problem and the sollution is to use a different remote software.

I use the freeware Team Viewer. You can download it free through a single google search "Team Viewer Download".

Hint: At the installation in each Pc choose the option that allows you to set a "predefined password" of your choise. Otherwise each time that the pc connects to the internet the password will change.

If you choose the predefined option then the only think that you have to do is to note the id of the pc that you want to connect (which is a nuber that does not change). As password you are always using the predefined one.

Ask me for more info if you dont manage the password thing.

Best luck,

Anastasios

jack January 9, 2009 03:11

Re: job on remote desktop
 
Hi Anastasios, thanks for you help, however, I have already figured out how to run it remotely. I use uVNC viewer and it is working, moreover, it offers nice and safe encryption (at least seems to me :)

bye!!!!!!!! jack


All times are GMT -4. The time now is 08:17.