CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

multiphase cfd model problems

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   January 7, 2009, 14:07
Default multiphase cfd model problems
  #1
zhijing peng
Guest
 
Posts: n/a
Hi I want use flunet to simulate a coating problem . My object is to calculate the flow rate for a long pipe with number of small holes .The liquid go through that pipe and spray out from those small holes . Which kind of model can be used for this situation? I already use VOF model but the result does not make sense .Can I use other two models for multiphase simulation? thanks a lot Any advice would be appreciate!
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Problems with multiphase wetsteam model Guido FLUENT 2 August 12, 2010 05:07
Multiphase flow convergence problems Nick CFX 1 July 12, 2007 21:18
Values of k and e for multiphase problems!! zack FLUENT 0 January 28, 2006 03:16
Multiphase Problems Andreas CFX 1 January 18, 2003 21:31
Multiphase flow problems Shane Gillis FLUENT 2 August 10, 2000 01:06


All times are GMT -4. The time now is 23:53.