Solidworks IGS to Gambit Problem

January 16, 2009, 08:28

Hi all i make a 2D model of Spur gear in Solidworks 2008 and save as IGS file and when i try to import it to gambit this error messade appear : GEOM-TRANSLATION LICENSE i want the solution for that Regards.

January 16, 2009, 12:23

Hi, it is for the license, the original license can import or export the IGS files , however there is a form with Catia v5, save as SAT file, your 2d model import to catia V5 and after open in the gambit.

sorry for my english, I´m learning.

,

Regards

January 16, 2009, 12:48

Hi but a can not find SAT file in Catia V5 Regards

January 16, 2009, 13:29

sorry Mustafa, the file is STEP or STP, save the file in catia v5 and after open the gambit in FILE - IMPORT - STEP, and open de file.

Iván

January 16, 2009, 13:35

sorry Ivan the same error is remain ,please send to me your privet E-mail to send to you the error as a picture. Regards

January 16, 2009, 13:36

ok my friend my e-mail is: tristan_rips19@hotmail.com

January 16, 2009, 13:41

i send to you an email if you can to give me your Tel number

January 18, 2009, 05:26

For importing a solidworks component (parasolid, step, iges, all others) i need the geom-trans license file. is there anyone who can help me out here please???? none of the above steps are working. same thing happened with my unographics software too...please help!

January 18, 2009, 12:21

I would contact your network administrator or contact fluent directly. Alternatively, if you're using a cracked version of fluent then you're SOL.

January 16, 2009, 08:28	Solidworks IGS to Gambit Problem	#1
Mustafa Ayad Guest Posts: n/a	Hi all i make a 2D model of Spur gear in Solidworks 2008 and save as IGS file and when i try to import it to gambit this error messade appear : GEOM-TRANSLATION LICENSE i want the solution for that Regards.

January 16, 2009, 12:23	Re: Solidworks IGS to Gambit Problem	#2
IvÃ¡n Guest Posts: n/a	Hi, it is for the license, the original license can import or export the IGS files , however there is a form with Catia v5, save as SAT file, your 2d model import to catia V5 and after open in the gambit. sorry for my english, I´m learning. , Regards

January 16, 2009, 12:48	Re: Solidworks IGS to Gambit Problem	#3
Mustafa Ayad Guest Posts: n/a	Hi but a can not find SAT file in Catia V5 Regards

January 16, 2009, 13:29	Re: Solidworks IGS to Gambit Problem	#4
IvÃ¡n Guest Posts: n/a	sorry Mustafa, the file is STEP or STP, save the file in catia v5 and after open the gambit in FILE - IMPORT - STEP, and open de file. Iván

January 16, 2009, 13:35	Re: Solidworks IGS to Gambit Problem	#5
Mustafa Ayad Guest Posts: n/a	sorry Ivan the same error is remain ,please send to me your privet E-mail to send to you the error as a picture. Regards

January 16, 2009, 13:36	Re: Solidworks IGS to Gambit Problem	#6
IvÃ¡n Guest Posts: n/a	ok my friend my e-mail is: tristan_rips19@hotmail.com

January 16, 2009, 13:41	Re: Solidworks IGS to Gambit Problem	#7
Mustafa Ayad Guest Posts: n/a	i send to you an email if you can to give me your Tel number

January 18, 2009, 05:26	Re: Solidworks IGS to Gambit Problem	#8
Jasbir Singh Guest Posts: n/a	For importing a solidworks component (parasolid, step, iges, all others) i need the geom-trans license file. is there anyone who can help me out here please???? none of the above steps are working. same thing happened with my unographics software too...please help!

January 18, 2009, 12:21	Re: Solidworks IGS to Gambit Problem	#9
Will Humber Guest Posts: n/a	I would contact your network administrator or contact fluent directly. Alternatively, if you're using a cracked version of fluent then you're SOL.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Solidworks --> Gambit	Sandeep	ANSYS Meshing & Geometry	16	August 18, 2015 01:06
SolidWorks to Gambit	Chris	FLUENT	0	November 6, 2005 17:15
solidworks to gambit	Alex	FLUENT	2	March 25, 2005 08:06
Importing Solidworks drawings to Gambit	Lior	FLUENT	3	February 4, 2005 16:43