CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

Problem with velocity values - flow through diffuser

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   March 5, 2012, 14:43
Default Please help!! URGENT!!Flow through diffuser
  #1
New Member
 
karthiek
Join Date: Jan 2012
Posts: 8
Rep Power: 14
karthikn21590 is on a distinguished road
Hello,

I am currently modelling flow through a gas turbine diffuser. I ve used K-E model with 0.3% turbulence intensity, inlet- 37m/sec velocity, outlet- atm pressure, free slip wall, incompressible flow, fluid-air.
I am also trying to verify the results experimentally.
The problem is my pressure values are sort of alright. But the velocity values have gone haywire.
My diffuser area ratio is 0.3249. So the exit velocity should be around 10m/sec. But I get values of 3, 4 m/sec. Is there an error in my model.
The continuity equation therefore is not satisfied. But all my residuals are perfect
Any suggestions?? Thank you

Last edited by karthikn21590; March 6, 2012 at 08:37.
karthikn21590 is offline   Reply With Quote

Reply

Tags
diffuser, velocity

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Steady pipe flow mean velocity higher than inlet velocity anita OpenFOAM Running, Solving & CFD 7 September 25, 2012 06:35
Velocity profiles problem behind the elbow (3D problem) kabat73 FLUENT 8 May 9, 2010 05:26
ATTENTION! Reliability problems in CFX 5.7 Joseph CFX 14 April 20, 2010 16:45
calculating mass flow rate from exported velocity values Sasha FLUENT 0 April 6, 2009 17:07
Velocity boundary values for inviscid flow jelmer OpenFOAM Post-Processing 2 September 12, 2006 10:56


All times are GMT -4. The time now is 14:25.