CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

CYCLONE BC-PRESSURE

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   February 10, 2009, 14:53
Default CYCLONE BC-PRESSURE
  #1
mashad
Guest
 
Posts: n/a
hi please please please..... is there any one know about backflow intnsity in pressure outlet BC in cyclone ? and why the mount of mass flow rate in report flux isnot zero(0)?

  Reply With Quote

Old   February 10, 2009, 21:11
Default Re: CYCLONE BC-PRESSURE
  #2
zongtwi
Guest
 
Posts: n/a
Do you mean the backflow turbulent intensity? I think you can safely assume the value to be similar to the turbulent intensity close to the pressure outlet in your domain. For closed systems, the flow coming back in, more often then not originates from the flow going out. Try to use those values and see if your results are OK.

Can you explain more about the mass flow rate report flux? How did you calculate it, and what non-zero value did it give? More details, otherwise it is hard to give advice.

  Reply With Quote

Old   February 11, 2009, 16:45
Default Re: CYCLONE BC-PRESSURE
  #3
mashad
Guest
 
Posts: n/a
hi In multi phases u can check the total mass flow rate for each phase. Report>fluxes>… And retain the default selection of Mass Flow Rate from the Options list. Select out… and inlet… from the Boundaries selection list. Click Compute. Note that the net mass flow rate is almost zero, indicating that total mass is conserved. . . . i don't understand your explaination about backflow turbulent intensity,pelese explain more againe. do you have thesis about cyclone+simolation+fluent?

  Reply With Quote

Old   February 14, 2009, 04:27
Default Re: CYCLONE BC-PRESSURE
  #4
mashad
Guest
 
Posts: n/a
please any one answer mi?

how dose calculate the backflow turbulent intensity?

and any one give mi theses about cyclone+simolation+fluent?

  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
cyclone ANJUM NAVEED FLUENT 18 April 25, 2012 01:47
Average static pressure BCs and aircore in cyclone KM CFX 2 December 17, 2007 21:50
Operating pressure in cyclone separator kharnab FLUENT 1 April 22, 2007 07:32
Cyclone Juan Catelén CFX 6 February 9, 2007 12:46
cyclone pressure drop - reg Subramanian.J FLUENT 2 December 22, 2006 06:34


All times are GMT -4. The time now is 18:52.