|
[Sponsors] |
February 13, 2009, 07:47 |
Problem solidification and rotations.
|
#1 |
Guest
Posts: n/a
|
Hi, iīm having a little problem with fluent, and i donīt know if it has a solution.
Iīm modelling a 2D Solidification problem. i have two concentric circles the first is maden in iron-cast and itīs in rotation (this is the great problem). Inside of that circle i have a ring (one wall is the iron, the other one is adiabatic) with the fluid tin. The materials are a diferent temperatures. Everything works at the TIN arrival to solidification temperature (503K), then, always my simulation breaks. I can to solve the same problem if the walls are quiets (with gravity on or off), but i canīt to able to solve with rotation. Do can i make it??? |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Typical ROTATIONS: (VALVE AIDED SAVONIUS ROTOR) | RAJKUMAR | FLUENT | 0 | August 2, 2005 00:50 |
solidification problem | Karthik | Main CFD Forum | 0 | June 4, 2005 03:33 |
solidification problem | ramesh | Phoenics | 1 | November 2, 2004 06:01 |
Problem in modeling solidification | S. Balasubramanyam | CFX | 0 | January 20, 2004 09:54 |
Solidification problem | Mike | Main CFD Forum | 1 | June 10, 2003 08:23 |