CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

How to use User defined database to add material

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   February 25, 2009, 12:00
Default How to use User defined database to add material
  #1
sangeeta
Guest
 
Posts: n/a
hello, i want to put argon transport properties depending on various temperature like specific heat, thermal conductivity, electrical conductivity, viscosity, etc.

can any one tell me how to use used defined database in materials tab in fluent.

  Reply With Quote

Old   February 25, 2009, 14:02
Default Re: How to use User defined database to add materi
  #2
jay
Guest
 
Posts: n/a
u can give either as linear or polynomial or piecewise polynomial..first..plot the curve and take the co-efficients and give from reverse (constant,co-eff of x,co eff of x square,x cube like that...refer user guide...
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
User-Defined Material Database Domenic FLUENT 1 June 1, 2015 09:34
Creating new user defined material Vidya FLUENT 4 August 26, 2013 09:26
User material database ashish FLUENT 11 January 19, 2013 14:52
ERROR in user-defined database materials Julien Lepaul FLUENT 3 April 16, 2008 09:13
How to change the material database for Fluent sxf FLUENT 1 May 3, 2005 16:37


All times are GMT -4. The time now is 21:22.