CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

injection not found in domain error

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   January 2, 2006, 12:49
Default injection not found in domain error
  #1
San
Guest
 
Posts: n/a
hi all,

I have initialized some particles using a udf on a surface in my domain. I get error while running fluent:

warning, injection 10 not found in domain -9.2e-3, 0.0, 3.27e-3 warning, injection 15 not found in domain -5.87e-3, 0.0, -2.1e-3 ........ several streams are not found in domain although the x, y, z coordinates it is mentioning for such streams lie well within my domain. These warning messages are followed by :

Error: FLUENT received fatal signal (ACCESS_VIOLATION) 1. Note exact events leading to error. 2. Save case/data under new name. 3. Exit program and restart to continue. 4. Report error to your distributor. Error Object: ()

Can anyone shed some light on this ???/

Regards, San
  Reply With Quote

Old   January 4, 2006, 01:49
Default Re: injection not found in domain error
  #2
MANOJKUMAR
Guest
 
Posts: n/a
Hello U properly define the co-ordinates of the injection. MANOJKUMAR

  Reply With Quote

Old   January 4, 2006, 11:58
Default Re: injection not found in domain error
  #3
San
Guest
 
Posts: n/a
hi,

I think I have figured out the problem. I had defined the surface at y=0 in gambit, but in fluent the mesh shows domain as not y=0, but rather a very small number i.e 10^-16, so if i put the particle positions as a very small number rather than zero, in my UDF, it works fine.

Thanks San
  Reply With Quote

Old   March 17, 2009, 23:24
Default
  #4
New Member
 
dengjiajia
Join Date: Mar 2009
Posts: 1
Rep Power: 0
dunga is on a distinguished road
Quote:
Originally Posted by San
;127423
hi,

I think I have figured out the problem. I had defined the surface at y=0 in gambit, but in fluent the mesh shows domain as not y=0, but rather a very small number i.e 10^-16, so if i put the particle positions as a very small number rather than zero, in my UDF, it works fine.

Thanks San
Thanks , I have solve my problem according what you discussion.
dunga is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
How to install CGNS under windows xp? lzgwhy Main CFD Forum 1 January 11, 2011 19:44
critical error during installation of openfoam Fabio88 OpenFOAM Installation 21 June 2, 2010 04:01
How to get the max value of the whole field waynezw0618 OpenFOAM Running, Solving & CFD 4 June 17, 2008 06:07
Regarding FoamX running Kindly help out hariya03 OpenFOAM Pre-Processing 0 April 18, 2008 05:26
Compiling problems with hello worldC fw407 OpenFOAM Installation 21 January 6, 2008 18:38


All times are GMT -4. The time now is 14:52.