Results mapping.

paka · March 18, 2009, 22:30

Hello everyone,

Does anyone know how to map results in Fluent? I tried to find it in documentation and in forum postings, but no success.

For example, I want to solve one mesh up to 5s, then create 3 new meshes and run them from the point of 5s by mapping previously obtained results onto new meshes.

Is it possible in Fluent? I was able to do similar thing in OpenFOAM.

Thanks,
Krst

paka · March 20, 2009, 01:49

The answer is simple.

1. First you must save the results from where you want to interpolate into an interpolation file.

To do so, go to: File>Interpolate>write data.

2. Secondly open the case file with the new mesh and this time choose:
File>Interpolate>read

Pick the file you created in 1st step. This will interpolate previously obtained data.

That's it.

March 18, 2009, 22:30	Results mapping.	#1
paka Senior Member Join Date: Mar 2009 Posts: 225 Rep Power: 18	Hello everyone, Does anyone know how to map results in Fluent? I tried to find it in documentation and in forum postings, but no success. For example, I want to solve one mesh up to 5s, then create 3 new meshes and run them from the point of 5s by mapping previously obtained results onto new meshes. Is it possible in Fluent? I was able to do similar thing in OpenFOAM. Thanks, Krst

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
CFX/WB mapping	Karil	CFX	2	August 8, 2008 08:28
3D to 2D mapping	Ramesh	Main CFD Forum	0	April 9, 2007 01:07
mapping of pressure results	venu	FLUENT	0	May 5, 2005 09:37
Mapping	George	Main CFD Forum	1	January 20, 2003 11:30
Mapping	Gurpreet Gambhir	Siemens	9	February 13, 2001 12:02

March 20, 2009, 01:49		#2
paka Senior Member Join Date: Mar 2009 Posts: 225 Rep Power: 18	The answer is simple. 1. First you must save the results from where you want to interpolate into an interpolation file. To do so, go to: File>Interpolate>write data. 2. Secondly open the case file with the new mesh and this time choose: File>Interpolate>read Pick the file you created in 1st step. This will interpolate previously obtained data. That's it.