CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

Eulerian Multiphases immiscible fluid

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   March 20, 2009, 09:38
Default Eulerian Multiphases immiscible fluid
  #1
New Member
 
Davide Girardini
Join Date: Mar 2009
Posts: 6
Rep Power: 17
girino is on a distinguished road
Hi all,
in my problem I have 3 different phases (air,freshwater and seawater), I wanna study the interaction between fresh and sea water by I have also the air. I chose the Eulerian mixture model. I want that air CAN'T mix with seawater and freshwater. I tried hard but I can't solve it. Can anyone help me? Thanks

Davide
girino is offline   Reply With Quote

Old   March 23, 2009, 03:52
Default
  #2
New Member
 
Sathees Kannan
Join Date: Mar 2009
Location: India
Posts: 10
Rep Power: 17
satheeskannan is on a distinguished road
Send a message via Skype™ to satheeskannan
how sea water and fresh water can be two separate phase..!!!!!
I think, these should be considered as single phase having two different components(saline water & fresh water).
Are you trying to simulate bubble column..?
Could you give some more information about the problem.
satheeskannan is offline   Reply With Quote

Old   March 23, 2009, 07:12
Default
  #3
New Member
 
Davide Girardini
Join Date: Mar 2009
Posts: 6
Rep Power: 17
girino is on a distinguished road
I have a pool filled by seawater (at 0 seconds the velocity of this volume is 0). And there is also a channel (his lenght is 1 m) that put the flow of the fluid (in my case fresh water) into the pool. There is a moment (about after 1 second) where the two fluids have the contact and after that they start to mix each other. But above the sea water and the fresh water there is air (primary phase) and I wouldn't the interactions air-seawater and air-freshwater. The seawater and the freshwater have two different densities (1010 and 1000 kg/mc). I have to use the water because I need atmosferic pressure above the two fluids and because the whole domain must be filled. Any suggestions?

Thanks for your reply
girino is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
fluid structure interaction taru agrawal FLUENT 4 September 10, 2007 04:12
How to apply negtive pressure to outlet bioman66 CFX 5 June 3, 2006 02:40
Eulerian Multi Fluid Model CFDtoy Main CFD Forum 3 January 25, 2005 14:44
My Revised "Time Vs Energy" Article For Review Abhi Main CFD Forum 2 July 9, 2002 10:08
Terrible Mistake In Fluid Dynamics History Abhi Main CFD Forum 12 July 8, 2002 10:11


All times are GMT -4. The time now is 06:33.