CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

Dump-combustor

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   March 27, 2009, 10:21
Default Dump-combustor
  #1
New Member
 
Join Date: Mar 2009
Posts: 14
Rep Power: 8
allamarein is on a distinguished road
I have to simulate a 2-D dump-combustor.
The chamber is about 100mm long and 25mm wide.
I followed tutorial-11's example.

Turbulent: k-eps standard
Species: finite-rate/eddy dissipation
Materials: cp mixture... density:ideal gas

boundary condition
------------------
a single inlet: mass-flow with fuel-oxider @ supersonic/gauge pressure 15 atm (anyway my flux is subsonic)
outlet: pressure outlet 1 atm

operative condition: 0 atm

Initialize
--------
from-all zones and I raise T to 2000 K.

Limits
-----
T max 4000 K

It doesn't converge.
I don't know my setting in Fluent is wrong or I use a bad mesh.

How many nodes should I use?
I usually use 'map' mesh with 0.2mm interval.
allamarein is offline   Reply With Quote

Reply

Tags
combustion, converge, dump-combustor, turbolent

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Turbulence modelling - 2d dump combustor pXYZ Main CFD Forum 0 April 25, 2006 12:43
Turbulence modelling - 2d dump combustor pXYZ Main CFD Forum 0 April 25, 2006 12:43
Help setting up combustor problem Tom FLUENT 0 February 5, 2005 02:20
starting with dump file Dougal McQueen CFX 4 January 16, 2004 20:03
CFX4 dump file format Glenn Horrocks CFX 2 October 12, 2003 19:16


All times are GMT -4. The time now is 20:22.