CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   FLUENT (http://www.cfd-online.com/Forums/fluent/)
-   -   need tutorial files(Simulation of Wave Generation in a Tank) (http://www.cfd-online.com/Forums/fluent/63096-need-tutorial-files-simulation-wave-generation-tank.html)

gholamghar March 28, 2009 04:08

need tutorial files(Simulation of Wave Generation in a Tank)
 
hello
i downloaded files of this tutorial from fluent.com but they are compatible with 6.3.28 and my solver is 6.3.21,could anybody please send me files of this tutorial(Simulation of Wave Generation in a Tank) that are older and are compatible with 6.3.21?
thanks

paka March 30, 2009 01:56

Why do you say they are incompatible with 6.3 version? As the tutorial was made for 6.2, and as far as I remember I did it with the same version of fluent.

gajre2005 August 18, 2009 02:41

hi
i have this problem too
the error said its for fluent 6.3.28
i have 6.3.26

diehard_rd October 6, 2009 08:29

even i am facing the same problem. can someone please help out.

teguhtf October 6, 2009 10:18

the same problem...
 
I've the same problem of yours!!
I think the simulation of wave generation in tank compatible for 6.3 version only. and it can run by 6.3.26. Ver 6.3.21 is demo version.
because i cannot find the 6.3.28 program on the net.
I have heard that the latest ver of FLUENT 12. Maybe it can work on this too!!:p

diehard_rd October 7, 2009 22:55

I am currently using ver 6.3.26 but it doesnt work in it. I guess it works only on 6.3.28 . A kind request to all the masters, to kindly design and create a mesh files for us noobs! Thanks in advance!

lordg April 20, 2010 02:38

Quote:

Originally Posted by diehard_rd (Post 231833)
I am currently using ver 6.3.26 but it doesnt work in it. I guess it works only on 6.3.28 . A kind request to all the masters, to kindly design and create a mesh files for us noobs! Thanks in advance!

Hi...
Does it say it'S incompatible when you try to load the Libudf file?

paka April 20, 2010 04:13

libudf... It means you need to recompile the source code according to your processor architecture and what operational system you are using. libudf is defined most likely as C file. There are also already compiled files, but what I see it means the original C file needs to be recompiled using fluent build in compiler. Try to look in Fluent documentation, it is pretty well explained.

lordg April 21, 2010 02:57

Quote:

Originally Posted by paka (Post 255389)
libudf... It means you need to recompile the source code according to your processor architecture and what operational system you are using. libudf is defined most likely as C file. There are also already compiled files, but what I see it means the original C file needs to be recompiled using fluent build in compiler. Try to look in Fluent documentation, it is pretty well explained.

exactly...

freeday September 5, 2010 05:19

I'm still have problem
 
I'm still have a problem. The recompile proses not running yet. It's still error. In the GUI written "nmake not recognized...".
May anybody can help me coz I'am an amateur in Fluent and still learning.
Thank's

freeday September 18, 2010 00:01

Good news
 
I have done. Everything because the C++ and set Environment

seucj October 21, 2010 23:13

Quote:

Originally Posted by gholamghar (Post 211117)
hello
i downloaded files of this tutorial from fluent.com but they are compatible with 6.3.28 and my solver is 6.3.21,could anybody please send me files of this tutorial(Simulation of Wave Generation in a Tank) that are older and are compatible with 6.3.21?
thanks

hi, can you give me a copy of the files about this tutorial?
thanks:)

seucj October 21, 2010 23:20

Quote:

Originally Posted by freeday (Post 275669)
I have done. Everything because the C++ and set Environment

hi, do you have the files of the tutorial "Simulation of Wave Generation in a Tank", i can't find them in Fluent.com. now i have a project about oil tank which is analyzed by Fluent software. i need the libudf.c file coz i'm a learner in udf.
thanks very much:)

teguhtf October 23, 2010 23:30

Quote:

Originally Posted by seucj (Post 280262)
hi, do you have the files of the tutorial "Simulation of Wave Generation in a Tank", i can't find them in Fluent.com. now i have a project about oil tank which is analyzed by Fluent software. i need the libudf.c file coz i'm a learner in udf.
thanks very much:)

check this http://www.fluent.com/software/sf_me...orial_wave.htm
teguhtf

seucj October 24, 2010 03:00

Quote:

Originally Posted by teguhtf (Post 280475)

Thanks a lot for your reply, I get it~:):):)

freeday February 7, 2011 01:04

How to save post pocessing data automatically?
 
Now, I want to capture Total Pressure every member or wall in my case. Can I get it automatically when iterate the program?
Maybe You can tell me how execute command work? Can I use it to solve my problem?

trantoan2008 May 30, 2011 01:40

Hi all,

I am studying "wave generation in a tank" tutorial to research my problem. However, I could not find "libudf" or "wave.msh" file to study them. Anybody can send me these file? I really need them to study my problem. Thanks for your help.
my email: trantoan2008@gmail.com

Quote:

Originally Posted by freeday (Post 293891)
Now, I want to capture Total Pressure every member or wall in my case. Can I get it automatically when iterate the program?
Maybe You can tell me how execute command work? Can I use it to solve my problem?


freeday June 13, 2011 06:22

Dear: trontoan2008

Can U tell me, what series Fluent software do you have? Cos not all libudf can be used. Most of them we must build by C++ software.

trantoan2008 June 13, 2011 08:43

Hi Freeday,

I am using Fluent V6.3.26 s/w. I think If we have udf file, we can build it in Fluent based on C++ s/w. So, if you have this udf, please send to me.

I appriciate your helping.
Best regards,

Quote:

Originally Posted by freeday (Post 311745)
Dear: trontoan2008

Can U tell me, what series Fluent software do you have? Cos not all libudf can be used. Most of them we must build by C++ software.


freeday June 16, 2011 23:37

I need your anothe remail address. Because trantoan2008@gmail.com is invalid.

Quote:

Originally Posted by trantoan2008 (Post 311777)
Hi Freeday,

I am using Fluent V6.3.26 s/w. I think If we have udf file, we can build it in Fluent based on C++ s/w. So, if you have this udf, please send to me.

I appriciate your helping.
Best regards,



All times are GMT -4. The time now is 17:01.