CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

How to adapt region?

Register Blogs Members List Search Today's Posts Mark Forums Read

Like Tree1Likes
  • 1 Post By zhaopeng

Reply
 
LinkBack Thread Tools Display Modes
Old   April 5, 2009, 08:48
Default How to adapt region?
  #1
Member
 
Join Date: Mar 2009
Posts: 43
Rep Power: 8
gholamghar is on a distinguished road
hello
i want to define air and water as picture below,but when i go to Adapt region in fluent i can just choose 4 points(a rectangular) to adapt my region,so if i want to define water as picture below what should i do,should i use adapt region two times to define water like this?
thanks
Attached Images
File Type: jpg a.JPG (7.6 KB, 59 views)
gholamghar is offline   Reply With Quote

Old   April 5, 2009, 13:09
Default
  #2
Member
 
zhao peng
Join Date: Mar 2009
Posts: 41
Rep Power: 8
zhaopeng is on a distinguished road
one time is enough,the vertex of rectangular can be located out of the geometry.
zhaopeng is offline   Reply With Quote

Old   April 5, 2009, 13:33
Default
  #3
Member
 
Join Date: Mar 2009
Posts: 43
Rep Power: 8
gholamghar is on a distinguished road
it means that water would exist out of my boundaries too,does it cause problems to my solve?(in my problem a wave will travel from left to right)
gholamghar is offline   Reply With Quote

Old   April 5, 2009, 22:57
Default
  #4
Member
 
zhao peng
Join Date: Mar 2009
Posts: 41
Rep Power: 8
zhaopeng is on a distinguished road
You can check the water phase distribution by contours of phases after patch,the water will not exist out of the boundaries.
amin_gls likes this.
zhaopeng is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
different between adapt and mark region? fadhil majnis FLUENT 0 November 10, 2008 04:29
Gambit HEX core method gives unwanted 2D region KK FLUENT 1 February 4, 2008 10:31
Rotating region of a centr. pump - Counter R wall Emre CFX 0 September 20, 2007 09:58
Trimmed cell and embedded refinement mesh conversion issues michele OpenFOAM Other Meshers: ICEM, Star, Ansys, Pointwise, GridPro, Ansa, ... 2 July 15, 2005 04:15
Import gmsh msh to Foam adorean Open Source Meshers: Gmsh, Netgen, CGNS, ... 24 April 27, 2005 08:19


All times are GMT -4. The time now is 14:49.