CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

Premixed combution -- divergence at the first iteration

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   April 10, 2009, 12:10
Default Premixed combution -- divergence at the first iteration
  #1
New Member
 
Join Date: Mar 2009
Posts: 14
Rep Power: 8
allamarein is on a distinguished road
I am trying to familiarizing with premixed combustion.
I tried to use a duct with map (it's a test geometry).
I use adiabiatic model and k-eps turbulence.

I get
"Error: divergence detected in AMG solver: premixc"
at the first iteration.

Maybe I initialize bad?
Do you have a tutorial about premixed combustion?
I's like to see a working case to understand...
allamarein is offline   Reply With Quote

Old   April 14, 2009, 04:07
Default
  #2
Member
 
anonym
Join Date: Mar 2009
Posts: 65
Rep Power: 8
Laci is on a distinguished road
Quote:
Originally Posted by allamarein View Post
I am trying to familiarizing with premixed combustion.
I tried to use a duct with map (it's a test geometry).
I use adiabiatic model and k-eps turbulence.

I get
"Error: divergence detected in AMG solver: premixc"
at the first iteration.

Maybe I initialize bad?
Do you have a tutorial about premixed combustion?
I's like to see a working case to understand...
Have yout tried to solve it step by step? First, without reaction, just air. Then try to calculate with reaction.
Laci is offline   Reply With Quote

Old   November 13, 2011, 19:31
Default (Divergence detected in AMG solver: premixc)
  #3
New Member
 
Hadi
Join Date: Nov 2011
Posts: 2
Rep Power: 0
Haniii is on a distinguished road
Hi
I am trying to use premixed combustion model for a problem that I have solved it without using species. I am getting error from the first time step. "Divergence detected in AMG solver"
Divergence detected in AMG solver, primitive error at node 1" > decreasing coarsening group size"
Divergence detected in AMG solver, primitive error at node 1" > increasing relaxation sweeps"
Also afetr I tried again changing a few parameters such as W-Cycle, Max coarse relaxation and coarsed by, in the Solution Controls windowone or two parameters I got

Divergence detected in AMG solver.

Do you know how can I solve this problem ?

Thank you very much for your help
Haniii is offline   Reply With Quote

Reply

Tags
amg solver, divergence, premixc, premixed combustion

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
how to increase "Newton Pressure Iteration Limit" kus CFX 9 April 21, 2013 01:54
premixed flame modeling problem peiyong wang CFX 1 July 18, 2008 12:02
Parallel runs slower with MTU=9000 than MTU=1500 Javier Larrondo FLUENT 0 October 28, 2007 23:30
Creating, loop or iteration using expression edito Jan CFX 3 July 28, 2003 11:01
Heat exchanger problem chiseung FLUENT 16 October 20, 2001 04:36


All times are GMT -4. The time now is 13:57.