CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

convergence problem

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   April 20, 2009, 04:36
Default convergence problem
  #1
New Member
 
Jin Chen
Join Date: Mar 2009
Location: sweden
Posts: 27
Rep Power: 8
swe704 is on a distinguished road
Dear all,

I am simulating impinging jet inside a room with standard K-e and standard wall function.

After running 7500 interations i still can not obtian steay redisual decay,especially from 5000 continutity appears oscillation and
ε also. I check the whole mass inbalance which is -3.2782e-07

Does anyone can give me any advice to check where is wrong? Which parameters should i take care?

Thanks in advance.
swe704 is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
convergence problem alexandre FLUENT 2 June 14, 2007 14:31
convergence problem ammi reddy FLUENT 1 March 28, 2007 17:01
3D Fluid Flow Convergence problem Emily FLUENT 2 March 21, 2007 23:18
Non Convergence of 3D Heat transfer cfd problem Balraj Main CFD Forum 3 December 9, 2004 01:24
Convergence problem Praveen FLUENT 0 September 15, 2000 06:34


All times are GMT -4. The time now is 01:57.