Creating bitmap images from fluent

LukeDickens · May 1, 2009, 11:12

Hi there.
very trivial question. ive created a set of heat transfer models on spinning disk brake rotors for my dissertation project. i need to save the contours of total temperature in bitmap or another image file type. i know you can do this and get rid of the black background too.
can anyone please enlighten me?
cheers
luke

Ralf Schmidt · May 1, 2009, 12:07

Hi!

use ->file -> hardcopy

Best wishes
Ralf

sourplum · May 1, 2009, 22:55

Hi friends..

What I usually do is displaying the graphic first (e.g. grid, contours, vectors etc) and then zoom to my zone of interest. At this time, u'll absolutely see a tab of the window u're displaying at the taskbar. right click at the tab and choose copy to clipboard. If u get bnw image, try to change the setting by right click at the tab and go to "page setup" and change the radio button from grayscale to color. Good luck in your project

p/s: I haven't try your method ralf. Thanks for sharing =)

Best regards,
sourplum

May 1, 2009, 11:12	Creating bitmap images from fluent	#1
LukeDickens New Member Luke Join Date: May 2009 Posts: 1 Rep Power: 0	Hi there. very trivial question. ive created a set of heat transfer models on spinning disk brake rotors for my dissertation project. i need to save the contours of total temperature in bitmap or another image file type. i know you can do this and get rid of the black background too. can anyone please enlighten me? cheers luke

May 1, 2009, 12:07		#2
Ralf Schmidt Member Ralf Schmidt Join Date: Mar 2009 Location: Austria Posts: 67 Rep Power: 17	Hi! use ->file -> hardcopy Best wishes Ralf __________________ CFD - nothing but Colourful Fluid Dynamics

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Two questions on Fluent UDF	Steven	Fluent UDF and Scheme Programming	7	March 23, 2018 03:22
Integration of a Custom C++ Model into FLUENT	Syed Haider	FLUENT	2	March 6, 2018 23:37
Comparing Fluent Time dependent result with Patran	venigall	FLUENT	0	January 13, 2007 19:30
FLUENT to ANSYS Temperature Mapping Procedure	schreiberc1	FLUENT	0	June 29, 2006 13:50
Advanced Turbulence Modeling in Fluent, Realizable k-epsilon Model	Jonas Larsson	FLUENT	5	March 13, 2000 03:27

May 1, 2009, 22:55		#3
sourplum New Member sourplum Join Date: May 2009 Location: Perak, Malaysia Posts: 11 Rep Power: 16	Hi friends.. What I usually do is displaying the graphic first (e.g. grid, contours, vectors etc) and then zoom to my zone of interest. At this time, u'll absolutely see a tab of the window u're displaying at the taskbar. right click at the tab and choose copy to clipboard. If u get bnw image, try to change the setting by right click at the tab and go to "page setup" and change the radio button from grayscale to color. Good luck in your project p/s: I haven't try your method ralf. Thanks for sharing =) Best regards, sourplum