Two-Phase flow(Air+Water) over an Air foil NACA0012

Saima · May 12, 2009, 22:57

Hi all,

I am working with two phase flow Eulerian (Air+Water) on ANCA 0012 angle of attack 0. But i m not getting the good results in the sence i am not getting water on the leading edge near to 0.

I saw some other profle in AIAA paper NACA 0012 with AOA=5 with a small bending at leading edge (but mine is symmetric around x-axis). it has water on leading edge but i don't know why i m not getting. I changed my Aoa=5.
Kindly guide me.

I am eagerly waiting for your reply.

Thank you,
Saima

haris · October 6, 2010, 12:01

Hi i am working on a naca0012 in heavy rain condition..i am using the DPM model..what is your goal?if you want to predict the behavior of the Cl and Cd i think that you have to youse the Discrere Phase Model with coupled between the phases..I have problems with the rain simulation too and i am searching for help..

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
air bubble is disappear increasing time using vof	xujjun	CFX	9	June 9, 2009 07:59
three phase modelling (air sand water )	Gunjan kumar	FLUENT	0	December 29, 2004 07:55
Separation phenomenon of water, droplet and air	Raymond	CFX	0	July 9, 2004 22:59
Help!!!problems in air jet into water bath	kim	FLUENT	4	June 9, 2003 07:04
uptodate water distribution network	fredius,magige,tanzanian,(e.a)	Main CFD Forum	0	January 27, 2002 07:10

October 6, 2010, 12:01		#2
haris New Member Join Date: Sep 2010 Posts: 6 Rep Power: 15	Hi i am working on a naca0012 in heavy rain condition..i am using the DPM model..what is your goal?if you want to predict the behavior of the Cl and Cd i think that you have to youse the Discrere Phase Model with coupled between the phases..I have problems with the rain simulation too and i am searching for help..