CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   FLUENT (http://www.cfd-online.com/Forums/fluent/)
-   -   Parse Error:- Interpreting UDF on remote terminal (http://www.cfd-online.com/Forums/fluent/64519-parse-error-interpreting-udf-remote-terminal.html)

moataz.che May 13, 2009 13:35

Parse Error:- Interpreting UDF on remote terminal
 
Hello,
I am trying to interpret the following udf on a remote linux host. Everytime I try to so I got the following error:-

cpp -I"/opt/asn/apps/Fluent.Inc/fluent6.3.26/src" -I"/opt/asn/apps/Fluent.Inc/fluent6.3.26/cortex/src" -I"/opt/asn/apps/Fluent.Inc/fluent6.3.26/client/src" -I"/opt/asn/apps/Fluent.Inc/fluent6.3.26/multiport/src" -I. -DUDFCONFIG_H="<udfconfig-host.h>" "/home/aammmm/mass_flux.c.txt"
Error: /home/aammmm/mass_flux.c.txt: line 2: syntax error.
Error: /home/aammmm/mass_flux.c.txt: line 2: syntax error.
Error: /home/aammmm/mass_flux.c.txt: line 2: syntax error.
Error: /home/aammmm/mass_flux.c.txt: line 2: syntax error.
Error: /home/aammmm/mass_flux.c.txt: line 2: syntax error.

My UDF is:-
#include "udf.h"

DEFINE_PROFILE(mass_flux,t,i)
{
#define R 0.0489
#define B 1./7.
real x[ND_ND];
real y;
face_t f;
begin_f_loop(f,t)
{
F_CENTROID(x,f,t);
y = x[1];
F_PROFILE(f,t,i) = 1.26*4.64*pow((1-y/R),B);
}
end_f_loop(f,t)
}


I will be so grateful for your help


All times are GMT -4. The time now is 17:32.