CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   FLUENT (http://www.cfd-online.com/Forums/fluent/)
-   -   multiphase flow VOF model set up (http://www.cfd-online.com/Forums/fluent/65216-multiphase-flow-vof-model-set-up.html)

rahaman June 9, 2009 03:49

multiphase flow VOF model set up
 
1 Attachment(s)
Hello all,

I am new in CFD and Using Fluent 6.23. I want to simulate water entry of wedge shape section (2D). I attached my mesh and boundary conditions. Due to symmetrical wedge, I only would like to simulate half section of wedge. The boundary conditions are as follows:

* Constant velocity inlet at the bottom of the domain
* At the top of the domain a pressure boundary set at atmospheric pressure
* Body and far wall of the domain define wall boundary conditions with free sleep
*Geometrical Symmetry about the center line

I want to use VOF model for free surface simulation.

Although I read the Fluent's document and tried some tutorials related to VOF model but I am not able to make set-up.

Can anyone help me how to set-up this problem in Fluent?


Rahaman


All times are GMT -4. The time now is 16:49.