CFD Online Discussion Forums

CFD Online Discussion Forums (https://www.cfd-online.com/Forums/)
-   FLUENT (https://www.cfd-online.com/Forums/fluent/)
-   -   Boundary layer meshing problem in Gambit (https://www.cfd-online.com/Forums/fluent/65381-boundary-layer-meshing-problem-gambit.html)

Crystal June 12, 2009 21:58

Boundary layer meshing problem in Gambit
 
Hi,

I noticed that whenever I perform boundary layer meshing on faces which are in contact with the boundaries, the entire geometry will end up getting meshed instead. Examples include (for external flow problem) a cylinder with one end touching the inlet boundary, and another end touching the outlet boundary; and geometries halved at the symmetry boundary.

How do I mesh the boundary layer for the selected faces only?


All times are GMT -4. The time now is 05:22.