[rogbrito]

How to create it (total temperature versus step or timestep) during a transient simulation on ANSYS Fluent 12 software?

thanks.

I´m simulating on a solid only domain and my results show that the static temperatures have greater results than the total temperatures, for a transient simulation. Why of this? I used the ANSYS Fluent 12 software. When i use ANSYS CFX 12, there is no option to export, in ANSYS CFX Pre, the total temperature results. How to export the total temperature to ANSYS CFX Post 12?

LIBRARY:
MATERIAL: Amostrak10Sol
Material Group = CHT Solids,Particle Solids
Option = Pure Substance
Thermodynamic State = Solid
PROPERTIES:
Option = General Material
EQUATION OF STATE:
Density = 14900 [kg m^-3]
Molar Mass = 1.0 [kg kmol^-1]
Option = Value
END
SPECIFIC HEAT CAPACITY:
Option = Value
Specific Heat Capacity = 508.1237 [J kg^-1 K^-1]
END
THERMAL CONDUCTIVITY:
Option = Value
Thermal Conductivity = 73 [W m^-1 K^-1]
END
END
END
END
FLOW: Flow Analysis 1
SOLUTION UNITS:
Angle Units = [rad]
Length Units = [m]
Mass Units = [kg]
Solid Angle Units = [sr]
Temperature Units = [K]
Time Units = [s]
END
ANALYSIS TYPE:
Option = Transient
EXTERNAL SOLVER COUPLING:
Option = None
END
INITIAL TIME:
Option = Automatic with Value
Time = 0 [s]
END
TIME DURATION:
Option = Total Time
Total Time = 110.778 [s]
END
TIME STEPS:
Option = Timesteps
Timesteps = 0.222 [s]
END
END
DOMAIN: Default Domain
Coord Frame = Coord 0
Domain Type = Solid
Location = ASM.1 METAL
BOUNDARY: Conveccaoo
Boundary Type = WALL
Location = ASM.1 CONVECCAOTOTAL
BOUNDARY CONDITIONS:
HEAT TRANSFER:
Heat Transfer Coefficient = 20 [W m^-2 K^-1]
Option = Heat Transfer Coefficient
Outside Temperature = 29.34 [C]
END
END
END
BOUNDARY: Fluxoo
Boundary Type = WALL
Location = SOL_2D_REGION
BOUNDARY CONDITIONS:
HEAT TRANSFER:
Heat Flux in = 1 [W m^-2]
Option = Heat Flux
END
END
END
DOMAIN MODELS:
DOMAIN MOTION:
Option = Stationary
END
MESH DEFORMATION:
Option = None
END
END
INITIALISATION:
Option = Automatic
INITIAL CONDITIONS:
TEMPERATURE:
Option = Automatic with Value
Temperature = 0 [C]
END
END
END
SOLID DEFINITION: Solid 1
Material = Amostrak10Sol
Option = Material Library
MORPHOLOGY:
Option = Continuous Solid
END
END
SOLID MODELS:
HEAT TRANSFER MODEL:
Option = Thermal Energy
END
THERMAL RADIATION MODEL:
Option = None
END
END
END
OUTPUT CONTROL:
MONITOR OBJECTS:
MONITOR BALANCES:
Option = Full
END
MONITOR FORCES:
Option = Full
END
MONITOR PARTICLES:
Option = Full
END
MONITOR POINT: T4
Cartesian Coordinates = 4.3 [mm], 3.5 [mm], 4.7 [mm]
Option = Cartesian Coordinates
Output Variables List = Temperature
END
MONITOR RESIDUALS:
Option = Full
END
MONITOR TOTALS:
Option = Full
END
END
RESULTS:
File Compression Level = Default
Include Mesh = On
Option = Selected Variables
Output Variables List = Temperature
END
TRANSIENT RESULTS: Transient Results 1
File Compression Level = Default
Include Mesh = On
Option = Selected Variables
Output Variables List = Temperature
OUTPUT FREQUENCY:
Option = Time Interval
Time Interval = 0.222 [s]
END
END
END
SOLVER CONTROL:
ADVECTION SCHEME:
Option = High Resolution
END
CONVERGENCE CONTROL:
Maximum Number of Coefficient Loops = 500
Minimum Number of Coefficient Loops = 1
Timescale Control = Coefficient Loops
END
CONVERGENCE CRITERIA:
Residual Target = 0.000001
Residual Type = RMS
END
TRANSIENT SCHEME:
Option = Second Order Backward Euler
TIMESTEP INITIALISATION:
Option = Automatic
END
END
END
END
COMMAND FILE:
Version = 12.0.1
Results Version = 12.0
END
SIMULATION CONTROL:
EXECUTION CONTROL:
EXECUTABLE SELECTION:
Double Precision = On
END
INTERPOLATOR STEP CONTROL:
Runtime Priority = Standard
MEMORY CONTROL:
Memory Allocation Factor = 1.0
END
END
PARALLEL HOST LIBRARY:
HOST DEFINITION: unifei
Host Architecture String = winnt-amd64
Installation Root = C:\Program Files\ANSYS Inc\v%v\CFX
END
END
PARTITIONER STEP CONTROL:
Multidomain Option = Independent Partitioning
Runtime Priority = Standard
EXECUTABLE SELECTION:
Use Large Problem Partitioner = Off
END
MEMORY CONTROL:
Memory Allocation Factor = 1.0
END
PARTITIONING TYPE:
MeTiS Type = k-way
Option = MeTiS
Partition Size Rule = Automatic
Partition Weight Factors = 0.250, 0.250, 0.250, 0.250
END
END
RUN DEFINITION:
Run Mode = Full
Solver Input File = \
C:\0_CIBIM_Validacao_18_Junho_2009_cedo\Caso_Teste _CIBIM\CasoValidaca\
oCIBIM.def
END
SOLVER STEP CONTROL:
Runtime Priority = High
MEMORY CONTROL:
Memory Allocation Factor = 1.0
END
PARALLEL ENVIRONMENT:
Number of Processes = 4
Start Method = HP MPI Local Parallel
Parallel Host List = unifei*4
END
END
END
END