CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

Fluent Geometry Limitations

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   June 23, 2009, 08:37
Default Fluent Geometry Limitations
  #1
New Member
 
pinho
Join Date: May 2009
Posts: 22
Rep Power: 16
jpinho is on a distinguished road
Hello everyone,

I was doing a simple simulation of a solid volume under conduction phenomena. A simple geometry and simple boundary conditions.

One of the faces I input a heat flux, which magnitude was around 1.5 mW, very low I know.. but this was validated experimentally.. anyway..

I run the simulation hundreds of times.. and for this case the volume would need much more time to heat as the results I knew would be acceptable.

After a while.. I decided to model the exactly same problem but in a magnitude 1000 times bigger, i.e., all geometry was in millimeters i scaled into meters, the same for conductivity, specific heat and heat flux.

Finally, I got the results I needed.. I got a little confused why fluent did the correct assumptions later on and didnt get them for the millimeters geometry. The mesh was exactly the same..

Is there any limitation of resolution for the geometry in fluent??

my shortest edge is 1.5 mm,

thanks
jpinho
jpinho is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Exporting structured mesh from ICEMCFD to Fluent? jeevan kumar FLUENT 1 January 23, 2012 12:21
Fidap to Fluent Ravi FLUENT 3 July 10, 2008 14:31
How can I change view to geometry in FLUENT John FLUENT 2 June 25, 2007 08:54
Geometry with fluent Vito Di Virgilio FLUENT 0 April 9, 2007 10:52
vitual _ real deneb FLUENT 3 January 22, 2007 05:31


All times are GMT -4. The time now is 09:47.