CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

Dynamic Mesh

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   June 28, 2009, 04:09
Default Dynamic Mesh
  #1
New Member
 
Amandeep
Join Date: Jun 2009
Posts: 3
Rep Power: 16
AmandeepPremi is on a distinguished road
Hi,
I am trying dynamic meshing for first time.
Ive succeded in building a udf and now have debugged it to be compiled succesfully but after setting boundary condition, dynamic zones etc bit before the initialization whenever i try the display-zone motion to see if its working. it does not.
i am using define_grid_motion to ssimulate a periodic bump over a waat boundary. but its not working. I going crazzy . please can someone help??
my deadline is tuesday. its very very imp for me.
please help.

Aman
AmandeepPremi is offline   Reply With Quote

Old   June 28, 2009, 20:24
Default
  #2
New Member
 
Join Date: Mar 2009
Location: Turkey
Posts: 15
Rep Power: 17
erkan is on a distinguished road
Instead of defining all boundaries in dynamic mesh >zones bar, just try to define the rigid bodies that will move.
Hope it works
__________________
Timeo hominem unius libri
erkan is offline   Reply With Quote

Old   June 28, 2009, 21:50
Default Thanks for replying
  #3
New Member
 
Amandeep
Join Date: Jun 2009
Posts: 3
Rep Power: 16
AmandeepPremi is on a distinguished road
My wall which is submerged in fluid is changing shape actually.
and so i define zones for the 1.wall, 2fluid, 3default interior. and rest which are stationary, I dont define anything for them in define-zones.
now when i try to look at mesh in mesh mootion, the boundary seems to have moved, therefore the udf seems to be wrking ok but the mesh over that does not move and hence some cells come inside the wall and error pops up for negative cell volume. i tried to lower the time step too much but with no success. also when i try to c the wall move in display-zone motion, i dont see anything.
any suggestion
BTW thanks for replying
AmandeepPremi is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
dynamic mesh on a hexa grid Manoj Kumar FLUENT 0 August 21, 2007 08:41
Dynamic mesh + grid adapt = Crash! (Files included BillH FLUENT 4 July 24, 2007 16:31
Dynamic Mesh Smoothing Sham FLUENT 4 July 10, 2007 21:08
dynamic mesh and grid adaption Dennis FLUENT 1 June 3, 2007 00:59
Help: Is it possible to use dynamic mesh model and Valery Ponyavin FLUENT 1 September 20, 2003 15:18


All times are GMT -4. The time now is 04:16.