CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

2 domains in 1 simulation

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   July 8, 2009, 10:59
Default 2 domains in 1 simulation
  #1
New Member
 
Xavi
Join Date: Apr 2009
Location: Amsterdam
Posts: 16
Rep Power: 9
xavi is on a distinguished road
Hi,
I have a transient simulation which has two volumes separated by a wall (door) which at some point of the simulation open and let the air pass through them from one domain to the other. The problem is that when I run the simulation with the doors closed (surfaces as walls) there are 2 volumes each one with one velocity inlet and pressure outlet, and the mass balance is unstable and doesn’t converge. When doors are open so then there is only one domain the convergence is excellent. Does anyone knows if FLUENT can operate with two domains at the same time? Any solutions? Many thanx
xavi is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
FSI TWO-WAY SIMULATION Smagmon CFX 1 March 6, 2009 14:24
Continuous vs interrupted simulation sega OpenFOAM Running, Solving & CFD 4 November 3, 2008 15:29
Multiple Solid Domains - Interfaces Scott CFX 8 July 31, 2008 15:20
Fire simulation using FDS from NIST Jens Main CFD Forum 1 January 22, 2004 02:53
3-D Contaminant Dispersal Simulation Apple L S Chan Main CFD Forum 1 December 23, 1998 11:06


All times are GMT -4. The time now is 05:53.