CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

Unable to switch from Rotating Reference Frame to Mixing Plane

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   July 10, 2009, 15:56
Default Unable to switch from Rotating Reference Frame to Mixing Plane
  #1
bwg
New Member
 
Ben
Join Date: Jul 2009
Posts: 3
Rep Power: 16
bwg is on a distinguished road
Hi All,

I am trying to implement a mixing plane between a radial impeller and diffuser passage. I have a solution using a rotating reference frame for the impeller zone, but when I then define a mixing plane (changing the interface boundaries to a pressure outlet and mass-flow inlet) at this interface, FLUENT crashes and gives a number of error messages, including "Stack backtrace generated for node id 3 on signal 11"

I am using the pressure based solver, compressible flow w/ k-w SST turbulence model. If anyone has experience with this situation, any advice would be appreciated.

Thanks in advance,

Ben
bwg is offline   Reply With Quote

Reply

Tags
mixing plane

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Error with Wmake skabilan OpenFOAM Installation 3 July 28, 2009 01:35
OpenFOAM on MinGW crosscompiler hosted on Linux allenzhao OpenFOAM Installation 127 January 30, 2009 20:08
G95 + CGNS Bruno Main CFD Forum 1 January 30, 2007 01:34
Building OpenFoAm on SGI Altix 64bits anne OpenFOAM Installation 8 June 15, 2006 10:27
about mutiple rotating reference frame lingo FLUENT 0 December 12, 2002 05:13


All times are GMT -4. The time now is 18:46.