|
[Sponsors] |
July 16, 2009, 21:13 |
flow
|
#1 |
Member
SIVALINGAM
Join Date: May 2009
Location: Kodaikanal,Madurai,India
Posts: 31
Rep Power: 16 |
We have been using pressure outlet initially for our case, but we found fluctuations in the residuals, hence we opted for outflow condition, it hold very good and converges smooth,but we have a doubt regarding that can we use outflow, will it give a good reliable solution? we use laminar flow with 2.123m/s as velocity inlet and segregated solver.Thanks in advance.
|
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Flow meter Design | CD adapco Group Marketing | Siemens | 3 | June 21, 2011 08:33 |
What is the difference between liquid reactive flow and gas reactive flow? | James | Main CFD Forum | 6 | May 15, 2009 12:14 |
potential flow vs. Euler flow | curious ... | Main CFD Forum | 23 | July 21, 2006 07:40 |
Plug Flow | Franck | Main CFD Forum | 3 | September 4, 2003 05:57 |
Instability and Vortex/roll structure | Z. Zeng | Main CFD Forum | 3 | May 10, 2000 05:18 |