Home > Forums > FLUENT

mass balance problem in multiphase model

Mark Forums Read

Reply

July 28, 2009, 16:01	mass balance problem in multiphase model	#1
mdsanij1 New Member mohamad Join Date: Jul 2009 Posts: 1 Rep Power: 0	Hi I modeling hydrodynamic seal disk with pressure inlet and pressure outlet and periodic BC and with MRF model. In this simulation I have cavitations and then I use mixturemultiphase model and cavitations model in fluent. I have mass balance problem, the inlet and outlet mass flow rate very differ from each other even taught I reduce the convergence criteria and solve problem further, please help me. Tanks for Ur help

Reply

« Previous Thread | Next Thread »

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Trackbacks are On Pingbacks are On Refbacks are On Forum Rules

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Multiphase mass balance	GZD	CD-adapco	0	August 6, 2008 13:37
Viscous model problem with bubbles in multiphase	Shin	FLUENT	0	March 10, 2008 18:31
particle, parcel and mass flow rate balance	flybird	FLUENT	0	May 24, 2007 10:44
DEFINE_SOURCE, injection in one Cell, mass balance	Vitali	FLUENT	2	April 27, 2007 16:39
evaporation multiphase model ( vof? mixture ? )	emanuele	FLUENT	0	March 2, 2007 11:44

All times are GMT -4. The time now is 01:38.