CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

Prevent an iteration after the convergence

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   August 12, 2009, 05:26
Default Prevent an iteration after the convergence
  #1
New Member
 
Join Date: Aug 2009
Posts: 2
Rep Power: 0
Deus is on a distinguished road
Hi everybody,
I'm new in fluent and I have a problem. I use fluent 6.3 in batch with a journal in input.
I must stop the calculation after each iteration and then use the command iterate.
I noticed that when the convergence is reached, the command "iterate" still works.
Is there a option which avoid the iterations after the convergence ?

Thank you for your help.
Deus is offline   Reply With Quote

Old   August 12, 2009, 05:31
Default
  #2
Member
 
CJ
Join Date: Jun 2009
Posts: 34
Rep Power: 8
solefire is on a distinguished road
It happens to me also. But just let it go, and it will stop soon!
solefire is offline   Reply With Quote

Old   August 12, 2009, 05:50
Default
  #3
New Member
 
Join Date: Aug 2009
Posts: 2
Rep Power: 0
Deus is on a distinguished road
Are you Sure ?
The convergence is reached after the iteration 9.
Then I try the command "it 1" many times, and it still works after 100 iterations.
Deus is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
how to increase "Newton Pressure Iteration Limit" kus CFX 9 April 21, 2013 01:54
Convergence of CFX field in FSI analysis nasdak CFX 2 June 29, 2009 01:17
Parallel runs slower with MTU=9000 than MTU=1500 Javier Larrondo FLUENT 0 October 28, 2007 23:30
Defect correction and convergence ganesh Main CFD Forum 4 June 30, 2006 14:20
Heat exchanger problem chiseung FLUENT 16 October 20, 2001 04:36


All times are GMT -4. The time now is 17:05.