CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

setting mass fraction...pliz help

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   August 27, 2009, 01:18
Default setting mass fraction...pliz help
  #1
New Member
 
victor mahan
Join Date: Aug 2009
Posts: 7
Rep Power: 6
vickrenz is on a distinguished road
i am trying to model a simulation of so2 dispersion from single stack (power plant). coal is used for fuel, and the contain of coal from data are sulfur (0.3%), carbon (49%), dust (6%), and other gas. i used turbulent model (spalart allmaras), energy, natural converction, and species transport without reactions.

if i determine top of stack as mass flow inlet and i calculate so2 flow rate for input of mass flow rate. Am i right if i set the materials only air & so2, and set the value of so2 mass fraction is 1 in mass flow inlet????(my assumption: gas which come out from stack to the atmosphere is only so2, no air)

Thanks anybody in advance for help

vickrenz
vickrenz is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Please Help.....Insufficient Catalogue Size Paresh Jain CFX 17 March 11, 2014 12:40
On the damBreak4phaseFine cases paean OpenFOAM Running, Solving & CFD 0 November 14, 2008 21:14
CFX Solver Memory Error mike CFX 1 March 19, 2008 08:22
volume fraction, Mass fraction and Bulk Mass flow Dr.jones CFX 1 January 25, 2006 04:32
Warning 097- AB CD-adapco 6 November 15, 2004 04:41


All times are GMT -4. The time now is 20:34.