CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   FLUENT (http://www.cfd-online.com/Forums/fluent/)
-   -   conduction between fluid and solid (http://www.cfd-online.com/Forums/fluent/67947-conduction-between-fluid-solid.html)

takin September 1, 2009 12:04

conduction between fluid and solid
 
I want to simulate a geometry like this:

T_o
---------
solid
--------- <-interface
Fluid
---------
T_i

I have already generated the geometry and mesh for two zones solid and fluid.

I do'nt know what kind of thermal boundary condition should be applied at wall defined as interface.

Manucia September 1, 2009 13:14

At the interface you should have two faces, (one and its shadow)
Both must be set as Thermal coupled condition
hope it helps

takin September 2, 2009 03:28

help!
 
Quote:

Originally Posted by Manucia (Post 228149)
At the interface you should have two faces, (one and its shadow)
Both must be set as Thermal coupled condition
hope it helps

thank you, but How can I set the"Thermal coupled condition"?

Manucia September 2, 2009 11:03

Define/Boundary conditions/open the thermal panel/ under thermal conditions set "coupled"


All times are GMT -4. The time now is 17:19.