CFD Online Discussion Forums

CFD Online Discussion Forums (https://www.cfd-online.com/Forums/)
-   FLUENT (https://www.cfd-online.com/Forums/fluent/)
-   -   wall adhesion (https://www.cfd-online.com/Forums/fluent/68265-wall-adhesion.html)

duaiduaihu September 12, 2009 04:35

wall adhesion
 
in fluent,when we activate wall adhesion in phase interanction ,we can define the contact angle .
my question is the contact angel should be the angel between phases,can we define the contact angle(wetting angel )between phase and wall?

i am working on the oil carrying the residual water in inclined pipe.in the experiment,the water is distributed alone the inclined pipe(upward) at certain velocity of the oil.but the CFD result is that the water could be taken away only the time is long enough..so i think it might be related with different wetting angles of the phases(oil and watet) with wall.

can you give me some ideas!
regards
duaiduaihu


All times are GMT -4. The time now is 16:24.