CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

how to set temperature profile in atmospheric boundary layer

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   September 16, 2009, 13:26
Smile how to set temperature profile in atmospheric boundary layer
  #1
New Member
 
victor mahan
Join Date: Aug 2009
Posts: 7
Rep Power: 9
vickrenz is on a distinguished road
hi all...

i am doing simulation of SO2 dispersion from stack. i have set the profile of temperature manually in velocity inlet, but i dont know why the result was abnormal where the range of total temperature is between -249 to -260 C. whereas i set the temperature from 28.2 to 15 C and the temperature of SO2 from stack is 130 C. Please give me some advice how to set temperature profile in atmospheric boundary layer???is there any reference???

thanx...
vickrenz is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
3D Boundary Layer Mario FLUENT 0 February 17, 2009 04:40
Ansys CFX Atmospheric Boundary Layer Marco CFX 1 December 1, 2008 21:46
How to generate a atmospheric boundary layer Morten Andersen CFX 3 January 16, 2007 07:48
temperature profile on boundary sivakumar FLUENT 5 November 24, 2002 01:58
help for Gambit: 2 edges + 1 boundary layer Peter FLUENT 0 August 9, 2002 19:41


All times are GMT -4. The time now is 23:49.