specify boundary condition type in particle tracking in order to trace flow filed

payam_IUST · October 15, 2009, 15:26

Hi to every one
I want to use particle tracking in order to trace flow filed at a complex geometry and get the spatial coordinates of certain elements of
flow field at certain time steps(Time history variables),My question is that what type of boundary condition I must specify in Descrete phase model when the particle collides the walls,with respect to that in fact the particle is a very small element of working fluid.
Any ideas welcome

Andrej · October 15, 2009, 17:16

Reflect. Normal=1.0 Tangential=1.0

October 15, 2009, 15:26	specify boundary condition type in particle tracking in order to trace flow filed	#1
payam_IUST New Member Payan Join Date: Oct 2009 Posts: 21 Rep Power: 16	Hi to every one I want to use particle tracking in order to trace flow filed at a complex geometry and get the spatial coordinates of certain elements of flow field at certain time steps(Time history variables),My question is that what type of boundary condition I must specify in Descrete phase model when the particle collides the walls,with respect to that in fact the particle is a very small element of working fluid. Any ideas welcome

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
No results for solid domain	Gary Holland	CFX	10	March 13, 2009 03:30
Problem with compile the setParabolicInlet	ivanyao	OpenFOAM Running, Solving & CFD	6	September 5, 2008 20:50
How can apply mass flow rate boundary condition?	Sima	Phoenics	1	December 1, 2007 18:55
Has anyone successfully used transition modell..p2	PetrK	CFX	12	May 26, 2006 16:27
Boundary Conditions	Jan Ramboer	Main CFD Forum	11	August 16, 1999 08:59

October 15, 2009, 17:16		#2
Andrej New Member Join Date: Oct 2009 Posts: 11 Rep Power: 16	Reflect. Normal=1.0 Tangential=1.0